Twin Screw Gearbox Counter Rotating

The ATS series twin screw gearbox consist of a reduction gearbox and distribution gearbox. Both gearbox modules are connected with the thrust bearing housing. The gearbox input shaft can be directly coupled to a motor or can be driven by the belt. The reduction of speed takes place in the reduction unit and required torque is created. This torque is transmitted in the distribution gearbox to the two counter-rotating output shafts. The axial forces resulting from the extrusion process are absorbed by thrust bearings inside the thrust bearing housing. The reducer is designed and sized accordingly using industry standards.

Rated Torque	From 2200 to 8400 Nm per output shaft
Transmission	i = 20 , 25
Power	Up to 75 HP
Center Distance	44 , 55 , 75.35 mm
Input Speed	1000 , 1500
Type	ATS